Draco Italia

Product Description

DRACO Stucco Ultra Tex is a 100% pure acrylic binder water based product containing a smooth semi-gloss texture which provides a decorative and protective coating with the ability to cover the minor defects that may be available on the surfaces. Specially formulated to withstand the harassment of Gulf weather with good flexibility. It has anti-carbonation properties, crack bridging properties (up to 1.4mm) and water resistance.

Recommended Usage:

To be used for exterior and interior concrete, plaster, brick and masonry surfaces.

APPLICATION DATA

Surface Preparation The surface must be clean, dry and free from dust, oil, grease and any contaminations.

Tools

Task Master Brush, roller or spray.

Spray Data

Pressure at nozzle : 180-200 kg/cm2 (2100 PSI)
Nozzle tip : 0.021"- 0.031"
Spray Angle : 40 -80o
Filter : be sure that the filters are clean.

Application Method

Apply two coats of DRACO Stucco Ultra Tex as a top coat by Task Master brush, roller or spray thinned with fresh water (10-15% by volume).

Recommended Paint System

DRACO Italico penetrating primer W.B If needed 1 coat
DRACO Italico Tex Primer 1 coat
DRACO Stucco Ultra Tex. 2 coats
Note: Paint system may be varying according to the substrate.

Packing size

20 Kg and 30 Kg Bags (for local).
40 Kg, 1 US gallon, 20 liters steel cans (for export)

Health and safety

• Inhalation Risks

Vapor or mist can cause headache, nausea & irritation of the nose throat & lungs.

• Skin & Eye Contact

Use good personal hygiene practices while working with this material. Dry contaminated clothing before reuse. For eye contact, flush with fresh water for at least 15 minutes. If irritation persists, get medical attention.

Skin Absorption: None expected.

Ingestion Health Risks:

It may be harmful or fatal. If swallowed ingestion may cause nausea, vomiting & diarrhea. Consult a physician.
Health Hazards: Acute & chronic (Not expected).