OUR COLORFUL LIFE

Product Description

DRACO Stucco Silicon Putty is based on styrene acrylic modified with silicon water based product. It is providing excellent permeability to the substrates with water absorption resistance. It gives good surface leveling and very smooth finish. It contains anti-fungal and algae additives.

Recommended Usage:

To be used on interior and exterior surface such as concrete, cement, plaster, gypsum board and wood works.

APPLICATION DATA

Surface Preparation, The surface must be clean, dry and free from dust, oil, grease and any contaminations.

Tools

Putty knife.

Application Method

Apply two coats of DRACO Stucco Silicon Putty by putty's knife thinned with fresh water (10-15% by volume)

Recommended paint system for interior

• • DRACO Italico Special PP Primer 2 coats
• • DRACO Italico Multi- Purpose Emulsion 2 Coats
• Note: paint System may be varying according to the substrate.

Packing size

• • 20 Kg (for local).

Storage

• The product should be stored in a dry, cool place and away from direct sun light.

• Cans should be well closed, classified according to the material's base and to be arranged by a maximum 3 plastic cans/row and 5 steel cans/row.

Health and safety

• Inhalation Risks

Vapor or mist can cause headache, nausea & irritation of the nose throat & lungs

• Skin & Eye Contact

Use good personal hygiene practices while working with this material. Dry contaminated clothing before reuse. For eye contact, flush with fresh water for at least 15 minutes. If irritation persists, get medical attention.

Skin Absorption: None expected.

Ingestion Health Risks:

ingestion may cause nausea, vomiting & diarrhea. Consult a physician.

Health Hazards: Acute & chronic (Not expected).